Author Archives: tinker1066

Range Report for 11-01-16

Both Linda and Aeryn (our house-guest) said, “You’ve been under a lot of stress- go shooting!” Yeah, twist my arm why don’t you… The obvious guns to shoot were the .22 Derringer and .45 Derringer since both had been modified to increase their reliability. The .22 target pistol needed to go too since I modified the front sight. So, testing… what else needs testing?  The Helwan is pretty new and hasn’t had gobs of ammo through it yet, so that for sure. I also took the Shopkeeper’s Special and the M&P .38 Hand Ejector just because they are a delight to shoot.
First up was the TD22 derringer. This had abysmal reliability in the first outing owing to the firing pin striking both light and too much towards the center of the base. With a new spring with better leverage and the firing pin adjusted to strike the rim it was reliable even with the crappy Remington Bulk ammo- only one round needed two strikes to ignite. The target below was shot at 3 yards. It is not an easy gun to shoot accurately, even at 3 yards but by the end I was learning to point-shoot it fairly well. It’s fun because it’s difficult.
img_0051
Next was the TD45 derringer, shooting Freedom Munitions 230-grain copper-plated hollow points. These have a ‘jacket’ of thick copper plating that completely covers the lead core. Recoil was predictably snappy but not painful… until it wore a hole in my hand after about 25 shots. 100% reliable, BTW. The target was shot at 5 yards. I borrowed a band-aid and soldiered on.
Sorry about the crappy picture- didn’t realize until I got home.
The Helwan functioned flawlessly with Freedom Munitions 115gr. Hollow-Points- basically the 9mm version of the .45 hollow points described above. Freedom Munitions XTP self-defense loads also ran without a hiccup. So far this gun has been 100% malfunction-free with ball and three types of 115grain HPs through both magazines. Accurate, mild recoil with a decent trigger and good rapid-fire groups at 7 yards; I am really enjoying this gun.
The .22 Target Pistol shot good ten-yard groups- still unfortunately high. Didn’t do a lot of shooting with it as it was having head-space issues; the barrel was slipping forward against the set-screws which resulted in unreliable ignition. A thorough cleaning and some lock-tight will hopefully solve the problem.
The Shopkeepers Special shot pleasing palm-sized rapid-fire groups at ten yards with Freedom Munitions 158 grain HPs- Fully plated like the 9mm and .45 loads. I also shot these out of the .38 M&P hand-ejector, producing this five-shot rapid-fire group at ten yards. Yes, the hole on the left is actually from three bullets. A twenty-five yard rapid-fire target produced two five-shot groups about twice as large as this one with two flyers about 5 inches low. Oops.
In the course of things one of the rangemasters recognized me from the internet and we had a pleasant chat. He tried out the TD45 (one shot was sufficient, thanks) and the two .38s. He remarked on the trigger of the M&P; it really is light and exceptionally smooth. The century-old workhorse did herself proud tonight! He also let me try out his 1911A1- an old-school IPSC comp-gun with a double-chamber compensator, full-length guide-rod etc. Delightful gun, very accurate. I ached to do double-taps with it, but sadly that’s against the range’s rules. Damn.
Finished things u at home cleaning all the guns while catching up on NCIS:LA with my Sweety and a good, strong cup of coffee. All in all a great evening.

New Generation 9mm+P Sentry

It occurred to me that with a potential sheep-stampede next month I thought I ought to see what ammunition I have on-hand so I could make up any shortfalls. While I was searching around to figure out exactly what ammunition I had on hand I came across six boxes of these leftovers from my friend’s estate last year.

These are New Generation Sentry 9x19mm+P rounds from South Africa. The bullet is a nickel-plated monolithic copper round with a composite cap to aid in feeding. On impact the cap disintegrates and the bullet does it’s thing. They were developed initially in the late 1990s as a low-recoil police round for the Singapore police that would offer good auto-body/glass/barrier penetration and expansion in soft tissue. They will supposedly penetrate laminated glass windshields at angles as steep as sixty degrees. They were successfully used by the South African Police Anti-Carjacking Unit and apparently some other branches of the police as well. These rounds were marketed in America early this century either as the Sentry or Eliminator rounds. Eliminators were lighter and had a significantly higher muzzle-velocity.

The bullet weighs 80 grains and has a claimed velocity of 1375fps (Chronographed at 1350 avg. from a Glock 19.) Expansion was reported to be about 12mm/.5 inches in test media. Some testers reported caps separating in the magazine and causing jams. Glocks and Berrettas do not seem to experience this issue but the sample-size is very limited. One thing of concern is noted for the .45 Sentry or Eliminator ammunition, and that’s split case-heads in guns without fully supported chambers, notably the Glock 21 and many 1911s. Personally I try to avoid any +P ammunition in automatics without fully-supported chambers.

I fired off a box of this ammo without any problems, though in my 2″ Taurus revolver I would not characterize them as ‘Light Recoil’ . I won’t use them in the Taurus again; +Ps are hard on it, and the velocity loss from the very short barrel might seriously limit this round’s performance. I did not experience any cap separations in the revolver despite the open cylinder and quite snappy recoil. I plan to try them in my Helwan Brigadier and see how they work.

I tracked down a lot of opinions about this ammo and very little in the way of facts. Most people on forums thought it was anywhere from useless to dangerous, but then reading further I’d discover that they had no experience with the ammunition. I did eventually find a post from a South African police officer that said he never experienced any problems with this ammo. Take that for what it’s worth because, well… internetz.

New Generation Ammunition is out of business,  possibly because as near as I can tell they never actually got the contract with the Singapore police and their reloaded ‘range ammo’ had an abysmal record for inconsistent quality and using worn-out casings. While they used all-new components for Sentry and Eliminator ammunition they could not help but be tainted by the reputation of the company’s more common loads.

So- forgotten super-ammo? Probably not; while it seems to have worked well enough I think if it was any sort of real improvement over conventional ammo someone would have taken up the design. As it is they are an oddity, yet another forgotten chapter in the ongoing attempt to improve small-arms ammunition.

Sure You’re Tacti-cool… But are you Tacti-cool Enough? Part Two

So your gun isn’t tactical. Your LBE isn’t tactical. Your plan, and your actions are tactical. So don’t worry if you cannot afford the latest tacti-cool gear. Plan to use what you have, and to use it effectively and sensibly.

This doesn’t mean you shouldn’t have good gear if you can afford it, or that ‘tactical’ gear isn’t useful. Having a light on your gun is useful. A good optic is useful. But don’t worry if someone comes out with something better; something you already have that works will not suddenly stop just because there’s a newer version. It’s far more important to be proficient with what you have than to have ‘the best’ or ‘the newest.’

This applies to training as much as it does to gear. People keep coming up with new ways to do things- not because the old way didn’t work, mind you. Sometimes I think it’s mostly because they cannot keep selling you what you already know. When shooting a pistol I use a modified Weaver stance. ‘But everyone uses Isosceles now!’ OK, maybe they do. ‘But everyone uses the thumbs-forward grip now!’ Nice for them. But- and this is important- I’m still hitting the target, I’m still putting fast follow-up shots pretty much where I want them. OK, it’s not the latest fad but I don’t care. It works for me, it’s what I’ve done for decades and it’s what I will probably do under stress until I have been retraining for years. If it works don’t fix it. Spend you time and money somewhere else that will provide a greater benefit.

Don’t get me wrong, training is essential. There are some great courses out there, and some excellent instructors. Having a resumé of these classes insures that you get to sit at the table with the cool kids. It doesn’t necessarily mean anything else though; instructors are not giving classes for free or out of the goodness of their hearts. They are doing it to make money, and there is nothing wrong with that. A good teacher may be doing it for the money, but they aren’t happy unless they are providing a good value for their pay. On the other hand I’ve had friends attend classes that were half-instruction and half infomercial for more advanced (and expensive) classes. And of course the instructor’s gear, which is naturally the best of the best, is available in the gift shop for an only slightly inflated price.

Training is essential- classes are not.  If you cannot afford good classes that doesn’t mean you cannot train. Do some research, watch some videos and emulate them in your practice. It’s not the best solution but it will get the job done. The point, whether we are talking about training, weapons or gear, is not to have the best-of-the-best, it’s to have the best that you can manage and more importantly to have a plan.

Have a plan. Practice the skills you need to execute that plan. Have another plan for when that one inevitably goes sideways. Make sure the plan takes into account a realistic assessment of your abilities and resources, and has work-arounds for any deficiencies. No matter what situation you find yourself in I guarantee this will work better than patches that tell the world you are a badass.