A Tale of Two Holsters

chllma0

Detonics Mk.1 Combat master .45, likely made in the early 1980’s.

I’ve been needing a holster for the Detonics Combat Master ever since Linda got it for me last June. Over the summer I used a pocket-holster, and that was fine, but now that the weather is cooling something less discrete would likely serve me better.

I’ve been making my own holsters since the 1980s (I’m a cheap bastard,) and eventually I got around to making one for this gun. Nothing fancy, just a simple OWB with a thumb snap for retention.

I like it pretty well; carries the gun high, nice and secure and disengaging the thumb-snap leaves my thumb ideally positioned to sweep the safety off. The leather is well away from the trigger-guard so I can get a proper grip when drawing.  The problem is it’s less discreet than I was wanting; the shape does not hold the butt of the gun in tight enough. Sure, it will work OK under a winter coat, but I really wanted something lower-profile. Something that might be hidden under a bulky sweater or lighter jacket.

I was talking it over with my buddy Pat and he said he had just the thing- it was even made for a Detonics.  I could try it out if I liked. Why not?

The holster in question is an OWB pancake holster made by K Rounds of Tukwilla, WA. In a fit of creativity they named it the OWB Pancake Holster.  It’s Kydex, very nicely molded to the firearm and curved to match the contour of the waist.

Nicely shaped with a slight forward cant. There is an adjustable tension screw just ahead of the trigger guard that allows you to adjust how firmly it grips the gun. The sweat-guard completely covers the hammer and safety.

Ask me how I know it was made for a Detonics. Go on, ask me.

the curve holds the gun quite close to the body, and the kydex belt loops are very stout.

I didn’t need to adjust the tension screw; the gun was held quite securely, but remained easy to draw. Attempting to shake the (unloaded) gun loose required more force than one would be likely to encounter.  Being kydex the holster weighs basically nothing. Worn at the 4-o’clock position the gun was kept tight to the body. The gun was adequately concealed under a light jacket, and quite easy to access and draw. Overall it was very comfortable, but…

That sweat-guard. It isn’t my favorite. It would occasionally poke me when sitting or driving, and it was a bit in the way of my thumb when drawing the gun.  Understand, I’m picking nits here; it pokes me because I’m fat, and the thumb thing is a problem because I’m a dinosaur who insists on using a 1911-pattern gun. This would not be an issue for more modern guns like a S&W Shield or Glock. Anyway, I’ve been living with the holster for most of a week, and while I am not a big fan of kydex I would not be unhappy to keep right on living with it.

These holsters are available for right or left-handed people, and you can select the amount of cant etc. when ordering. They offer this holster for a lot of different handguns, and for $64.99 I think you could do a lot worse; this is a solid, quality product that delivers the goods. I would recommend it. You can find it here: K Rounds OWB Pancake.

So, is my search for a holster at an end? Nope- as good as the K Rounder is I’ll be making another holster soon. I really do prefer leather over kydex.  I also like the security of a thumb-snap; in the real-world I’m not sure it’s better than a kydex tension holster, but I feel better with one. Especially on a short gun worn high on the belt. Besides, making holsters keeps me from getting in worse trouble…

Thanks to Pat Hillyer for the loan of the holster!

Michael Tinker Pearce,  1 November 2018

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *