Test-Firing Two New Remingtons

IMG_0877

I’ve made a Percussion version of the Pug for a buddy and discovered that my First Konverter would drop right in so I decided to test-fire it and my new Remington project. Since the recoil-shield is not cut to load cartridges on either gun it was necessary to remove the cylinder to load and unload, but that’s really not that much of a pain.

The Pug performed flawlessly, firing a little low and left. This will be easily rectified; I won’t even need to remove the sight to do it. Another member of the range, Pat, Also fired it. He loved it- had an ear-to-ear grin, and loved the feel of the gun.

The new Remington did not do quite so well, not the least because I forgot I had not yet mounted a front sight… oops!  Even so it was no real problem to keep the lead on the paper at five yards. The real problem was that the latch on the longer loading lever was not up to holding the lever against recoil and it dropped as seen in the photo. I will need to redo it with a more robust system. Oh well, live and learn, eh?

So, a bit of a mixed bag, but mostly good. I very much enjoyed shooting both guns. I’m really looking forward to wrapping up these projects. Now if Grizzly Industrial would just get the damn drive-belt for my lathe to me…

Seriously, I am pissed at them. They held up my order because I had not updated my tax-exempt status- despite the fact that it was a taxable purchase and I had paid tax on it! Morons. It’s straightened out now and the belt will arrive next week. Oh well. Not much to be done except spread the word.

The load used to test these guns was my go-to .45 Colt load- a 200gr. LRNFP over 9.0gr. of Unique with a CCI large pistol primer.

Michael Tinker Pearce, 07 September 2017

Leave a Reply

Your email address will not be published. Required fields are marked *